At present we have a Universal Device Poller for ADSL for Cisco 8XX series ADSL modem routers, we would like to move it over to a Custom Poller but have been having issues.
Rough steps we have been through:
1. Create new Poller
2. Select Techology 'Node details
3. Select a test node I can confirm from our Universal Device Poller returns a value for the SNMP OID we wish to poll. An example would be 1.3.6.1.2.1.10.94.1.1.4.1.2 (adslAtucChanCurrTxRate
4. Select 'SysObjectID'
5. Cancelled use of the Constant value
6. Searched and selected 1.3.6.1.2.1.10.94.1.1.4.1.2
Received 'The selected OID is not supported. Browse the available OIDs or manually add one and poll its value from the current node.' which I know is not correct as the Universal Device Poller returns a value for this OID.
If I attempt to define the value manually I get the following error:
Not sure where to proceed from here, I have heard that some values can't be polled via Custom Poller but wasn't able to find if this is one of them.