Remediation Scripts using Variables from Inventory

Hello All,

I'm new to scripting within NCM and I'm wondering if someone can help me out:

I want to use a remediation script to deploy an ACL to a Cisco router.   One line of the ACL contains an entry for the VLAN 450 Subnet of the device.  Since this value is different for every site (about 100 of them) I would like NCM to pull the value from the database and use it in the script.  Can this be accomplished?

Example:

Hostname:  RouterA

Loopback 1 IP:  192.168.1.1 /24

Gigabit 0/0.1 IP:  10.1.1.253 /24

Gigabit 0/0.450 IP:  10.XXX.XXX.253 /24

ACL:

ip access-list extended VLAN450_Ingress

remark PERMIT LOCAL VL450 TO LOCAL VL450

permit ip 10.XXX.XXX.0 0.0.0.255 10.XXX.XXX.0 0.0.0.255

...<snip>

Any help would be appreciated.

-Ken